DI601
Outdoor PIR, selectable 10/20/30 m (33/66/98 ft)
- Electronic range setting: 10/20/30m
- Attractive aesthetics
- 10 to 70º detection angle
- 180º pan & 90º tilt for flexible install
- Sensor module is hidden
Related products
At a glance
Outdoor motion sensor - quad PIR
DI601 Outdoor PIR Detector is an outdoor motion detector and alarm trigger that uses two independent passive infrared detectors. Both sensors must trigger to cause the detector to signal an alarm. DI601 uses quad pyro technology to deliver precise, reliable presence detection.
Easy and quick to install
Programmable options include a variable pulse count and a choice of three detection ranges: 10 m / 33 ft., 20 m / 66 ft., and 30 m / 98 ft. DI601 includes jumpers that let you configure internal end-of-line (EOL) resistor values, when EOL resistors are required. Moreover, the integral dual-axis tilt sensor allows 180º of pan and 90º of tilt, which increases the speed of the outdoor installation and provides incredibly accurate aiming of the detection pattern.
Aesthetics and hidden sensor module
DI601 design has a neat and professional appearance that gives no visible indication of the orientation of the detector head and totally hides the wiring.
Details
- Electronic range setting: 10/20/30m
- Attractive aesthetics
- 10 to 70º detection angle
- 180º pan & 90º tilt for flexible install
- Sensor module is hidden
- Built in EOL resistors
- High dust and humidity resistance (IP55)
- 5 years warranty
Technical specifications
| General | ||
|---|---|---|
| Technology |
PIR
|
|
| Application type |
Wall mount
|
|
| Anti masking |
No
|
|
| Pet immune |
No
|
|
| Camera |
No
|
|
| Detection | ||
|---|---|---|
| Max. detection range |
30 m
|
|
| Detection range selection |
10, 20, or 30 m
|
|
| Coverage (field of view) |
70°
|
|
| Vertical optical axis adjustment |
90° tilt
|
|
| Horizontal optical axis adjustment |
180° pan
|
|
| Undercrawl protection |
No
|
|
| Alarm time |
5 s
|
|
| Wired/wireless | ||
|---|---|---|
| Wired-wireless |
Wired
|
|
| Inputs/outputs | ||
|---|---|---|
| Alarm relay characteristic |
NC / NO, Volt free relay, signal contact 24 VAC/DC @ 50 mA with an integral 25 Ohm series resistor
|
|
| Relay configuration |
Multiple EOL values
|
|
| Electrical | ||
|---|---|---|
| Power supply value |
9 to 15 VDC
|
|
| Current consumption |
7 mA (12 V nominal)
|
|
| Physical | ||
|---|---|---|
| Physical dimensions |
125 x 175 x 130 mm
|
|
| Net weight |
306 g
|
|
| Shipping weight |
532 g
|
|
| Colour |
Silver
|
|
| Material |
High impact ABS plastic with HDPE cover, UV stabilized
|
|
| Mounting height |
3 to 6 m
|
|
| Environmental | ||
|---|---|---|
| Operating temperature |
-30 to +65°C
|
|
| Environment |
Outdoor
|
|
| IP rating |
IP55
|
|
| Coverage | ||
|---|---|---|
| 10 to 70° detection angle, 30 x 24 m / 98 x 79 ft. coverage max. | ||
| Fresnel lens | ||
|---|---|---|
| 28 zones for each detection element, which can be masked with the curtain sliders | ||
| Customized optics | ||
|---|---|---|
| Double silicon shielded quad element eliminates 50,000 lux of white light | ||
| Outputs | ||
|---|---|---|
| Silent, solid state, magnetically immune. | ||
| Pulse count | ||
|---|---|---|
| 1 or 2 | ||
| Temperature compensation | ||
|---|---|---|
| Analogue (thermistor) and digital sensitivity adjustment | ||
| Control | ||
|---|---|---|
| Digital microprocessor with nonvolatile memory | ||
| LEDs | ||
|---|---|---|
| Red | Programming LED | |
| Blue | Detector Alarm | |
| Infrared | Walk tester communication | |
| Built in EOL resistors' values | ||
|---|---|---|
| 1, 2.2, 3.3, 4.7, 5.6, and 6.8 k ohm | ||
| Mounting height | ||
|---|---|---|
| Variable up to 6 m / 20 ft. Optimum height 3 m / 10 ft. for full range | ||
| EN approved | ||
|---|---|---|
| EN 50130-5, Grade 2, Class IV | ||
Downloads
All downloadsDatasheet
Installation sheet
Certificates
If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.